RRP$1449
With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx® legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.
Features:
- Advanced Feedback Suppression (AFS™)
- Type V™ Noise Reduction
- PeakStopPlus™ Limiting
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±15dB
- 18 dB per octave 40Hz low-cut filter
- ±12dB input gain range
- XLR, TRS and Euroblock Inputs and Outputs
- Internal Toroidal Transformer
- Dyanmic range of greater than 113dB
- User Power Up Features
- Relay Bypass for Power Failure System Protection
Specifications:
- INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot), and Euroblock
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+22dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
- OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock
Type: Balanaced/unbalanced, RF filtered
Impedance: Balanced >120 ohm, unbalanced >60 ohm
Max Output Level: >+20dBu balanced/unbalanced into 2k ohm or greater
- SYSTEM PERFORMANCE
Frequency Response: 20Hz to 20kHz, +0.5/-0.25dB
Dynamic Range: >113dB, "A" weighted
THD+Noise: <0.003%, typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
Noise Reduction: Up to 10dB of dynamic broadband noise reduction
Digital Resolution: 24 bits
Sample Frequency: 48khz
Latency: 2msec
- POWER SUPPLY
Operating Voltage: 120VAC 60Hz, 220-240VAC 50/60Hz
Power consumption: 17W
Main Connection: IEC receptacle
Dimensions: 5.25" H x 19" W x 7.9" D
Full Technical Specifications available on www.dbxpro.com/IEQ31.htm
Note: Specifications subject to change without notice.