JBL Quality Design
A sophisticated, advanced network topology design is utilized in JRX100 models to ensure quality performance. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. All full-range models feature Neutrik® Speakon and 1/4" input connectors.
Constructed To Take A Beating
All JRX100 series models are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To ensure durability, JBL constructs these enclosures with advanced adhesives and closely mechanically spaced fasteners, while competitive systems typically rely on glue. Non-resonant, all metal handles are used and an 18 gauge, full metal grille protects the drivers. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
Dual-Angle Pole Socket
A new feature of the JRX100 line is the dual-angle pole socket. This feature allows the speaker to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, it is possible to achieve more even audience coverage and reduce the destructive acoustic reflections from walls.
JRX112M
Designed from the ground up as a stage monitor, the JRX112M is a 12" two-way stage monitor in a compact enclosure also featuring the dual-angle pole socket for front-of- house applications. Voiced to perfection, the JRX112M cuts through to allow performers to hear everything they need for a professional performance.
JBL JRX112M Features:
- 12" two-way portable stage monitor or front of house speaker system
- 12" woofer
- 1" titanium diaphragm, fluid-cooled compression driver mounted on a Progressive Transition waveguide
- SonicGuard high-frequency protection
- Carpet-covered, trapezoidal enclosure
- 3/4" MDF construction
- 18-gauge steel grill
- 35 mm dualangle pole mount socket
- Steel handles
- Neutrik Speakon and 1/4" input
Specifications
- Frequency Range (-10 dB): 60 Hz - 16 kHz
- Frequency Response (±3 dB): 70 Hz - 12 kHz
- Sensitivity (1w/1m): 99 dB SPL
- Nominal Impedance: 8 ohms
- *Power Capacity: 250 watts
- *Peak Power Capacity: 1000 watts
- Recommended Amplifier Power: 250 watts to 500 watts into 8 ohms
- Maximum SPL: 129 dB
- Nominal Dispersion: 90º x 50º
- Crossover Frequency: 1.8 kHz
- Dimensions (H x W x D): 572 mm x 394 mm x 318 mm (22.5 in x 15.5 in x 12.5 in)
- Weight: 19.5 kg (43 lbs)
- High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive Transition™Waveguide Low Frequency Driver: JBL M112-8 Input
- Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel * "Power Capacity" and "Peak Power Capacity" ratings are based on the average and peak power capacity of product samples subjected to a 100 hour power test using random noise with a 6 dB crest factor, in accordance with IEC standards.
Full Technical Specifications available on www.jblpro.com/JRX/JRX112.htm