Package includes:
- Lab Gruppen fP3400 power amplifier
- 2 x JBL SRX715, 15" 800W, two-way, bass-reflex speakers
- 2 x speaker cables
JBL SRX 715 speaker
The SRX715 offers the highest level of performance available from a portable, pole or tripod mountable speaker. The 2265H Differential Drive woofer handles 800 watts (continuous) while weighing only 48 lbs (22kg). A 2431H 3" diaphram, neodymium compression driver on a 75° x 50° horn makes the SRX715 the best choice for general purpose sound reinforcement, live performance, music playback or speech. When the application calls for increased low-frequency extension, add the SRX728S or SRX718S subwoofer.
All SRX700 2 and 3-way models may be operated full-range or bi-amplified. The selection is made by means of a high-current, recessed switch mounted on the input plate. The switch is accessible while also being protected from accidental mis-setting. The same switch arrangement is used on the subwoofer to select +/-1 or +/-2 operation.
SRX700 is constructed of top quality birch plywood and coated in JBL's rugged DuraFlex Finish. Extensive use of internal braces and bulkheads makes the enclosures extremely rigid. This reduces acoustic losses caused by panel resonance. The attractive CNC-machined, 16-gauge steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the system to create acoustical interference. The grilles are internally lined with acoustically transparent foam to provide additional driver protection and give a totally professional appearance.
SRX700 uses JBL's parented Differential Drive woofers with neodymium magnets. Neodymium's magnetic properties allow a few ounces to replace pounds of conventional magnet.
Specifications:
- System Type: 15", two-way, bass-reflex
- Frequency Range (-10 dB): 40 Hz – 20 kHz
- Frequency Response (+-3 dB): 53 Hz - 20 kHz
- Coverage Pattern: 75° x 50° nominal
- Power Rating (Continuous/Program/Peak): 800 W/1600 W/3200 W
- Dimensions (HxWxD): 71.1 cmx43.9cmx40.6cm (28"x17.3"x16")
- Weight: 22 kg (48 lbs)
Lab Gruppen fP3400 power amplifier
The fP Series power amplifiers are extreme in many ways. Loaded with Lab.gruppen’s innovative technology, these amplifiers hold up a banner of unique and dependable quality. Those who own are those that know: Lab.gruppen amps are “The Coolest Power Amps on the Planet”.
When professional sound quality is needed, “On the Road” or permanently installed, Lab.gruppen delivers the best trouble-free investment you can make
Key Features:
- 2 x 1500Watts RMS at 4ohms, 2RU, 10kg
- Regulated Switch Mode Power Supply (R.SMPS™): The built-in regulated ability gives consistent, reliable sonic performance.
- Remaining Cool: The Intercooler™ cooling system enables super efficient dissipation of heat through the use of well-engineered pure copper heat sinks and speed-controlled fans.
- Convertible Power Amplification: The Matching Load System (MLS™) allows the user control over power transfer into individual speaker loads.
- Class Evolution: Class TD™, Lab.gruppen’s own evolutionary step past the common Class D, is incorporated into the flagship models: fP 6400 and fP 3400. Combining the best from Class A/B, reliable sonic performance, with the efficiency of Class D, this technology guarantees exact transfer of audio signal along with optimal use of energy.
- Gain Flexibility: The Multiple Position Gain Switch (M.PGS) allows maximization of headroom and elimination of clipped signals. Easily matching industry gain requirements is achieved by selecting one of eight gain settings, ranging from 20dB to 41dB.
Full Technical Specifications available on www.labgruppen.com/fp3400