OUT OF STOCK ETA MARCH
System includes:
KP1T Transmitter features:
UHF band PLL synthesized design
Frequency agility over a 25MHz bandwidth, with 48 pre-programmed frequencies available
Built in limiter circuitry eliminates distortion under excessive input levels
Front panel monitoring headphone jack
KP1R Receiver Features:
UHF band PLL synthesized design
Frequency agility over a 25MHz bandwidth, with 48 pre-programmed. Frequencies available with the touch of a single button.
Dual-antenna true diversity reception. Eliminating signal dropouts and enhancing RF stability
Dynamic expander circuitry delivers a S/N ratio greater than 90dB.
Signal indicators.
Highly efficient power consumption circuitry ensures long operating hours from two AA batteries.
POWER on/off RF signal indicators
KP1 Receiver specifications:
Frequency Range 720-865MHz
Bandwidth 25MHz
Oscillation Mode PLL Synthesized
Frequency Stability ±0.005% 0?-+50?
Modulation Mode FM stereo modulation
Max. Deviation Range ±68KHz
Receiving Mode Diversity receiving
Receiving Sensitivity -107dBm
Squelch Level -100dBm -90dBm -70dBm
T.H.D. 1%
Maximum S/N Ratio 94dBA
Frequency Response 80Hz-15KHz ±3dB
Stereo Separation 35dB
Output Jack 3.5mm?stereo earphone jack
Output Power (32?) 2X50mW under 1KHz(THD 3%)
Earphone Impedance ?16?
Power Supply 2 AA batteries
Current Consumption 150mA
Dimensions 123X65X27mm
KP1 Transmitter specifications:
Frequency Range 720-865MHz
Bandwidth 25MHz
Oscillation Mode PLL Synthesized
Frequency Stability ±0.005% 0?-+50?
Modulation Mode FM stereo modulation
Output power Low:<10mW; High: <100mW
Spurious Rejection -60dBc
Max. Deviation Range 25KHz
Frequency response 50-15,000Hz
T.H.D. <0.5%
Audio Output Line level X2, XLR
Audio Input 6.3mm phone jack x2
Headphone Output Impedance >16ohm
Antenna Connector TNT (50ohm impedance)
Dimensions 210x175x45mm
Dimensions 123X65X27mm
