Specifications:
- Frequency Range (-10 dB): 36 Hz - 16 kHz
- Frequency Response (±3 dB): 45 Hz - 12 kHz
- Sensitivity (1w/1m): 100 dB SPL
- Nominal Impedance: 4 ohms
- Power Capacity: 500 watts RMS
- Peak Power Capacity: 2000 watts
- Recommended Amplifier Power: 500 watts to 1000 watts into 4 ohms
- Maximum SPL: 133 dB
- Nominal Dispersion: 90º x 50º
- Crossover Frequency: 2 kHz
- Dimensions (H x W x D): 1099 mm x 464 mm x 432 mm (43.25 in x 18.25 in x 17 in)
- Weight: 42.6 kg (94 lbs)
- High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive Transition™Waveguide
- Low Frequency Driver: JBL M115-8A x 2
- Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel
Full Technical Specifications available on www.jblpro.com/JRX/JRX125.htm
Soundcraft GR1000 powered mixer
Dubbed ‘The Box that Rocks’, the new family member has the same cool styling of the GigRac 300 and 600, but is a more powerful full stereo version, featuring expanded 3-band EQ on the inputs, two 7-band graphic equalisers and 10 high-quality preset digital effects. The 1000st is slightly higher than its brothers at 5U (8.75 inches/223mm) but still the GigRac 1000 makes it easy to set up your own PA, needing just speakers and cables to complete a system which delivers awesome power and performance. Get from mic or guitar to a great sound in no time at all. Everything you need is provided, in a stylish and proffessional package that comes in a robust case which protects your GigRac on the move, stores your cables and allows you to carry it over your shoulder.
As with the GigRac 600 model, there are two output signal paths, one for the main front-of-house output and one for stage monitors. In normal stereo use, the two power amps deliver a full 500W of power (@ 4 ohms) to the Main (FOH) output, but the 1000st can be switched to provide 500 watts to the Main output and 500 watts to the Monitor outputs.
Other additional features include pan controls for the inputs to the stereo bus, a stereo graphic EQ on the main output and a 7-band mono graphic EQ on the monitor output, 12-segment bar graph meters for both Main and Monitor outputs, a stereo playback input (for CD playback, for example) and a stereo submix input. In standby mode all channels are muted until the band is ready to play, while the playback input remains active for interval music.
Don’t worry about the weight, however, as the 1000st features a lightweight switched-mode PSU, derived from years of successful switched-mode design at Soundcraft and BSS.
Features:
- 8 Microphone Inputs
- 2x500W power into 4 ohms for stereo or main/monitor operation
- 48V Phantom Power for condenser microphones (Inputs 1-4 only)
- PAD buttons for controlling loud input signals (Inputs 1-4 only)
- 4 Stereo inputs
- Treble, Mid and Bass controls
- Pan/Bal controls
- Individual volume controls on each channel for Monitor level.
- Individual volume controls on each channel for Main level.
- Individual send controls for GiGFX on each channel
- 2 x 7 Band Graphic Equaliser
- 10 x Digital Effects (24 Bit/48 kHz)
- Record Output
- Playback Input
- Speakon speaker connectors
- FX bypass switch
- FX bus output socket
- Submix input
- 2 x Amplifier 'Clip' warning lights
- 2 x 10 segment LED output level meters
- 15-1/2"W x 7"H x 10-1/3"D
- 25.3 lbs
Full Technical Specifications available on www.soundcraft.com/product_sheet.asp?product_id=129