System includes:

• WT-1 plug-in tranmsmitter
• KRU3 antenna diversity receiver
• aluminium case

The WT1 plug-in transmitter turns every dynamic microphone into a radio mic and it is the most cost effective way to upgrade your favourite harwired microphone to wireless microphone. Just plug the plug-in transmitter into the XLR connector on your mic, and the KRU3 stationary receiver will receive your vocals with the proverbial clarity of UHF transmission technology.

The fibre reinforced case of the WT-1 adds very little weight to the mic due to its light weight fibre reinforced case. An input gain control allows the user to adjust the gain to suit the micropnone output level. A noiseless on/off swith allows to mute any microphone with no on/off switch.

Plug-in transmitter specifications:

Frequency 781-806MHz

RF Output: >10dBm

Modulation Type: FM

Max Deviation: +/- 40kHz

Spurous Emission: >55dBc

Nominal Current Drain: <40mA

Power Requirements: 1x 1.5V AA

Dimensions: 11.2 x 2.9 x 2.8cm

KRU-3 receiver specifications:

Antenna diversity receiver
Frequency Range: 460-970MHz
Power requirements: 12-18V DC nominal, 500mA
S/N Ration:>80dB
Border Upon Channel Rejection: >80dB
RF Image Spurious Rejection: >80dB
Receiving Sensitivity:>-105dBm (S/N: -12dB 15KHz)
Dimensions: 27.1 x 17.7 x 4.3 cm